Easy to print fully working YoYo

Easy to print fully working YoYo. Print in PETG for the best results. PETG is easy to sand in a smooth surface. Print with a little paint on support as shown in de picture. Use a m4 20mm bold and nut, to fit the two parts together. Print in 0.2mm. The cover easily clicks in place (depending on you  printer) You can easily design your own cover. The lid is 42.36mm in diameter and 1.8 mm high. If you want to use a real bearing look for R188 bearing. Size 4.7mm 6.35mm 12.7mm. Print with 100% infill to give the YoYo some weight.