Strong Shelf Support V1-2 - Holds 30lbs! (Tested)

Test Information

I tested this hook using PLA+ at a 15% infill. I used a 20mm wood screw. 30lbs of resistance before breaking. Theoretically, using 4 or 6 supports (recommended) you could get up to 180lbs of bearing weight. Print at a 50% infill for strength. No supports are needed when rotated to be flat.

Dimensions:

• Length: 45mm
• Height: 45mm
• Width: 25mm

V2 Dimensions:

• Length: 50mm
• Height: 50mm
• Width: 25mm
• Thickness: 5mm
• Screw head diameter: 7.5mm
• Screw taper: 23 deg.
• Rounded edges: 2.5mm

Enjoy!