Glowing Stargate Chevron earrings

Stargate chevron inspired earrings. Glowing with LEDs and small battery.

Print instructions

Printable without supports

For glowing version you'll need:

• 2.5 to 3V SMD LED, the shinier the better.
• CR1025 3V battery
• solder and 2 short wires
• 2x earring hooks

Lifetime is based on LEDs ~1 day

I printed it in transparent ABS (other transparent materials will work as well), sanded a bit and for coloring used silver color and red permanent marker (for Pegasus version use blue :) with blue LED)

Note: this was printed on M3D Micro