Valve Steam Deck official stl oriented to print on mk3

I was able to print the Steam Deck in a single piece on my MK3S using the gcode I have uploaded. The 3mf file should work if you want to change details, but I have not printed using it.

Recommended settings:

Supports: I would recommend using paint on supports for the base of the deck and for the joysticks. paint on supports for the rear triggers R4, R5, L4, and L5 might prevent some small overhang failures, but I didn't bother.

Layer height: 0.2mm

Original valve files: https://gitlab.steamos.cloud/SteamDeck/hardware