Perfekt, genau was ich gesucht habe. Vielen Dank für das Design.
100mm (4in) Hose Clamp (More Sizes Added)
I liked the original design, but found it was a little too loose. So I resized for 100mm and modified the clasp.
702
2146
10
6442
updated
April 21, 2026
Makes
Comments
Hi, could you add 3" variant?
@DemDocs_2987646 sure, I can do that. Give me a little bit and I’ll post it.
@DemDocs_2987646 The 3" variant is uploaded now. It's pretty close to one of the other sizes I had, but I didn't know if you were specifically looking for something slightly larger or not so I made the slight adjustment for you. Let me know if you need anything else.
View one more comment
Looks ideal! Please can you do a 63mm one?
@jingles_759749 I should be able to do that. Just out of curiosity, what is 63mm?
@jingles_759749 The 63mm or 2.5in variant is uploaded now. Please let me know if you have any issues with it or need any other sizes.
View 6 more comments
Works great and is much faster to take up and down than a traditional clamp.
@Nam_4134553 Thanks for the feedback! I'm glad it worked well for you.
Hey! Love the design. Are you able to make a 50mm (~2") version? I'd really appreciate it.
@ChristopherH_2511111 Sorry for the delayed response. I'm glad you like the design! Did you still need to the 2" version? If so, I'll try to get it done this weekend and get it posted.
@Apok84_3063287 No worries and thank you for the reply! I printed a model that works fine for my needs from thingiverse (although I like your updated design better and it definitely uses less filament). So no need on my side, but this is definitely one of the better hose clamp models out there!
View 4 more comments
I really like the mechanism, works really well in PETG. Just note my comment to the 80mm request, and it'll be perfect once the dimensions are fixed
@skipfie I just uploaded a new file with the recommended changes. Would you mind trying it out and letting me know if it works for you?
@Apok84_3063287 just tried it out, you nailed it. Thank you for the fast iterations.
View one more comment
Hey! Are you able to create an 80mm variant too? Thank you!
@skipfie that shouldn’t be a problem. I’ll try to get that uploaded in the next day or two. I’ll just add it to this entry.
@skipfie I just added the 80mm version. Please give it a go and let me know if you have any issues or suggestions for improvements.
View 3 more comments
Great work! Very simple, I didn't have to worry about buying more screws 🤭
I used it in my project. I plan to make a remix with a hole for wall mounting soon :)
Nice designed, working fine, thank you :-)
@Bobert_3158348 Thanks for the rating! I'm glad that it worked well for you. Let me know if you need any other sizes.
@jjmar_2178125 I'm glad the clamps are working well for you!
@Apok84_3063287
can u make it for 165mm round?
@IgiGogi_549957 I should be able to do that. I'll add a remix for it. I'll try to get it done within the next couple of days. (edited)