MicroSwiss NG Fan Shroud for SuperPINDA

Material: PETG minimum. ABS is reccomended. 

3 Walls 

15% infill 

Supports enabled on build plate only.

2x M3 heatset inserts required for probe clamp.

Heater KIT here:

https://www.trianglelab.net/products/chcb-v-kit-ceramic-heating-core?VariantsId=11361
 

Probe here:
https://www.prusa3d.com/product/superpinda/ 
 

SuperPINDA requires a 4.7khohm pullup resistor****

Moved the fanducts down to accomadate the TriangleLabs CHCB-V and utilize the Prusa SuperPINDA probe(really any* M12 inductive probe).