Death's Head Moth #2 Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 200x200mm in size. Also included a 150x150mm size.

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.3

PLA+ Sunlu Brown Transmission Distance: 1.5

PLA+ Sunlu Coffee Transmission Distance: 3

PLA+ Sunlu Burly Wood Transmission Distance: 2.5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #9 (0.8mm) swap to Brown

At layer #13 (1.12mm) swap to Coffee

At layer #19 (1.6mm) swap to Burly Wood for the rest.