Conduit/Pipe Clips

A collection of conduit/pipe clips for the following sizes of conduit/pipe.

Nominal outer diameter: 20mm, 25mm, 32mm, 42mm and 55mm.

Maybe used for both rigid or flexible conduit. 

The clips may also be clipped to each other, side-by side, for a neater installation.

Fixings holes are for No 8 Panheads. Three fixing holes are provided on the 40mm and 55mm clips which gives the option of using either, a single centre fixing or the two outer fixings to prevent rotation.

These clips will also work for MDPE cold water pipes too.

All .stl files are correctly oriented for printing. Print in PETG, PCTG or similar with layer height of 0.2mm, three walls and 15% infill.

Give me a shout if you need any different sizes.