CO2 12g Wall Mount

CO2 Wall Mount.

I ended up using a Dremel style tool and sandpaper for a better fit for my needs.

Screws used: 4,0 x 20mm

Thanks to the original designer!

My print settings:

Layer Height: 0,2

Perimeters: 3

Solid Layers: 3

Infill: 25%

Filament: NX2 PLA “PLA+”

No supports 

Troubleshooting: 

Measure twice, print once ;-) 

Remember: Not all printers print the same!

Added screw holes for mounting on a wall or any flat surface.

Added 1 mm length for the CO2 cartridge