Spark Guard - 1X30 Belt Grinder

Modification of the existing design to make the mounting hole stronger than the original acrylic version.  Took 5 versions to get the hole to line up and the back of the cover to properly overlap the frame.  It's not a perfect fit but it works without interfering with the belt.

The part is printed on its side to ensure the strength around the hole and the belt cover.  The hole is oversized to ensure it will fit on any belt sander.

Note, the images show the model with the material type (PETG) and revision number. This will not show up in the file provided here.

ORCA Print Settings
• Material: PETG @ 250C
• Line: .6mm Nozzle, .6mm line wide, .3 layer height
• Aligned seam
• Walls: 4 walls, 4 top/bottom layers
• Infill: 20% Cubic
• Support: Normal, .1mm Z distance