Demon Hunter - Summer of Darkness album art Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 200x200mm in size. Also added 150x150mm size.

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.6

PLA+ Sunlu Grey Transmission Distance: 2

PLA+ Sunlu Burly Wood Transmission Distance: 2.5

PLA+ Sunlu White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Grey

At layer #13 (1.12mm) swap to Burly Wood

At layer #18 (1.52mm) swap to White for the rest.