Monsgeek FUN60 Pro Voronoi Keyboard Case (Inspired by the Holy60)

This model is designed with inspiration from the Holy60 but for the Monsgeek FUN60 Pro. I don't know if the case will work with other PCBs. The case does not account for the battery, as I don't use the wireless functions. 

Printed on an Elegoo Centauri Carbon. Full size case wont fit on 256x256 so chop it up in your slicer. I used circle pin connectors to fit them together and glued them with Loctite Super Glue.

Printed in bone colored PLA Plus with 3 walls but feel free to experiment. Definitely use supports. Make sure to orient the print in your slicer to lay the bottom of the case onto the print bed!

NOTE, the case is not the sturdiest thing in the world but I have not had any issues. 

The keyboard has the electrical tape mod, PE foam and jade keycaps to mimic the Brilliant Bloom Osteo Striga from Destiny 2. I am using the original plate and switches that come with the FUN60 Pro but there is a plate included in the files because it was necessary to make the case. I have not tested the 3d printed plate so I don't know how it fits or sounds. GLHF