The Diamond Shoe 2 Hueforge

I hope you like my model and appreciate my work.

Thank you for your support, likes, shares, downloads, reviews, and photos of your prints.

If you have any questions, please don't hesitate to contact me.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 180x180mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.2mm and the Actual Depth is 1.7mm

Filaments Used:

PLA Kingroon Black Transmission Distance: 0.4

PLA Kingroon White Transmission Distance: 5.8

This print uses 2 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to White for the rest.