STARLINK | GEN 3 ROUTER MOUNT (ceiling or wall)

Mounting bracket for the STARLINK router GEN 3, model No: UTR-232 (part of the STARLINK STANDARD kit and MINI kit 2025)
0
7
0
52
updated June 24, 2025

Description

PDF

Mounting bracket designed for the STARLINK router GEN 3, model UTR-232 (part of the STARLINK STANDARD 2025 kit). Compatible with a flush-mounted installation box (KP68 – EU standard for household sockets and switches). Originally intended for ceiling mounting, but can also be used on walls, either with the installation box or directly. When installed, the router’s front side sits parallel to the mounting surface (no tilt), and all cable connections are completely hidden when using the installation box.

Screw spacing for standard installation boxes (e.g., KP68, KU68) is 60 mm.

The model in the photos is printed from inexpensive PLA on a PRUSA MK4S, using supports (HF04, 0.20mm SPEED). Print time is approximately 2 hours and 30 minutes.

The model hasn’t been fully cleaned, but after assembly it looks fine.

Tags



Model origin

The author marked this model as their own original creation.

License