DnD terrain rollers – Wooden floor and wall #11

This digital 3D printable model of Stamp Rollers is meant to create patterns of Wooden floor and wall on terrains for Dungeon and Dragons! It can be used on modeling putty, clay, or XPS polystyrene. 
Or you can use it to create seriously ancient and cool-looking cookies 😋

Check out the full collection of DnD terrain rollers – Wooden floor and wall!

We would love to hear what other patterns we should make! You can let us know in this google form: https://forms.gle/vwLaZ22MVDUUJer59

SIZE
The roller is 15 cm high and the length of the pattern is 10 cm (6×4 squares, each 2.5 cm).

At 100% scale, the roller’s dimensions are approximately:
- Width 30 mm
- Length 30 mm
- Height 150 mm
You can scale the model as you wish, but we can’t guarantee that the model will print well at a much smaller size.

You can use the roller to create an amazing large wall or use just some parts of the roller. You can also combine it with cutters to create tombstones etc. 

These models were brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https://3d-mon.com/links/
 

3D PRINTING SETTINGS

This roller is designed for SLA printers. You can print it on FDM too, but it can be a bit tricky. If you decide to print on FDM, use these settings:
- Layer height 0.15 mm
- Infill 10%
- Outer perimeters: 0.35 mm
- Retractions: OFF

Printing settings will vary greatly depending on your specific printer.

💛 If you like our work, please, consider joining our Printables Club to access hundreds of rollers! 💛