Modular Screw Container

A practical and fun 3D printable triple-chamber container with interlocking screw threads! Each section can be screwed on or off individually, making it perfect for organizing small items like pills, spices, screws, or other essentials.

🧩 Modular Design

📦 Three Separate Compartments

🔄 Stackable & Expandable

🎨 Optimized for multi-color prints

🪛 Threaded connections ensure secure closure

⚠ Please Note:

✅ This model has been successfully tested.

🔍 Please pay attention to seam placement (Z-seam) in your slicer settings for the cleanest results.

🧱 Depending on your slicer and overhang settings, support structures may be required, especially for the internal threads or cap geometry. Please check your slicer preview.

🖨 Print Instructions:

• Recommended Material: PLA or PETG

• Layer Height: 0.2 mm

• Supports: Not required

• Infill: 15–20%

• Tolerance: Ensure 0.2–0.3 mm gap for smooth thread rotation

📐 Dimensions:

• Total height (stacked): ~120 mm

• Outer diameter: ~55 mm

• Each chamber: ~40 mm height (internal)