Cube Bike Rack Topmount Addition

I've designed this to make some more mounting room on my stock bike rack, which is only intended for bike bags. It simply snaps on top and can be further secured with zipties. Apart from the 3D-printed parts, you'll need:

• 10mm Diameter Aluminium / Metal solid rod (Length: 300mm)
• (optional) 4x Zipties, max. 6mm wide to secure the mount

Print settings:

• Layer height: 0.32mm
• Perimeters: 4
• Infill: 35%
• Material: PETG, ASA or ABS preferrably

For me, these settings resulted in a very sturdy rack. 

ATTENTION: 

The fittings for the rod are ø10,4mm which for me and PETG-CF was a perfect press fit. 
Depending on your printer/material this might need adjustmend.

For that purpose, use the provided .f3d file.

Happy bikepacking!