FIXED Perfect Gloomhaven Standee

Original design by rpgweb was very innovative, but had a few design flaws - primarily the “clamp” design that was very hard to assemble and was very easy to break. This remix uses a hexagonal core with a very slight “bite” at the top which allows for an easy to assemble one-way friction fit.

Additionally, the original design had squared off slots on the top to hold the cardboard cutouts. This created sharp seems at the edges, which would damage the cardboard. This design uses rounded shapes to create the slots so the cardboard is much less likely to be damaged.

Last major change was reconfiguring the arm design for the “click” mechanism so that it had similar performance in both the clockwise and counterclockwise direction.

Minor changes include:

• Aligning the numbers on the dial so they are centered correctly in the window
• Updated the “HP” plate with a larger friction fitting
• Added an “S” plate for shields (or whatever special attribute you want to track)
• Made most of the parts slightly thinner
• Made the window slightly larger and added a bevel

All code is available as an OpenSCAD design here: https://github.com/pconwell/3d-models/blob/main/gloomhaven/monster-stands.scad

• Replaced the “clamp” design that attached the top and base with a one-way friction fitting that is easier to assemble and less prone to break
• Replaced standee holder on top with rounded shapes so cardboard doesn't get scratched by edge seams
• Updated “click” arm design so that it is not biased towards counterclockwise spinning
• Centered numbers on dial
• Updated “HP” plate with different friction fitting
• Added “S” plate (for shields or other special attributes)
• Made pieces slightly thinner with a larger beveled window