ESRack Module for TP-LINK TL-SG108E

Part Description

ESRack Module for the TP-LINK TL-SG108E. The dimensions are slightly different from the SG108.

Possible Configurations: 

- [Mounting Bracket Short] + [Module] + [Module] + [Mounting Bracket Short]
- [Mounting Bracket Medium] + [Module] + [Mounting Bracket Medium]
- [Mounting Bracket Short] + [Module] + [Mounting Bracket Long]
- [Mounting Bracket Long] + [Module] + [Mounting Bracket Short]
- [Mounting Bracket Long] + [Mounting Bracket Long] (Blank Front Plate)

Suggested Print Settings

Material: PLA+/PETG (I used eSun PLA+)
Nozzle: 0.4 mm
Layer height: 0.2 mm
Wall loops: 3
Top/Bottom shell layers: 3
Infill: +25%
Infill pattern: Gyroid
Orientation: Print on front surface
Support: Not needed when correct orientation is used

High infill is needed to avoid bending after installing equipment. I used 20% infill and with heavy equipment it's bend a bit.

Assembling

To connect the each individual modules together, you need:
- 4x M4 nuts (DIN934M4)
- 4x M4x12 allen screws (DIN912M4x12-8.8)

Use standard rack screws and nuts for rack mounting.

Works for the TP-LINK SG108E. There is already a remix for the SG108, but the dimensions are slightly different.