Cover for binder clip

The solution has two parts:

1. Binder clip.
2. 3D printed cover.

These clips can easily hang A3 posters with a thickness of up to 5mm (Plywood, cardboard, etc).

The clips used for testing are 19mm wide and 30mm long, but the cover works with other dimensions.

Keep in mind that for clips longer than 40mm the clip will show through the bottom with the current design.

This cover is meant to be a base for a logo or sign of your own. The cover front is flat, making it easy to glue anything onto it.

Very easy to print. There is a thicker area in the center to prevent the layer to start on an exterior wall.