Toothpaste Squeezer with Automatic Locking Mechanism

Printing advice:

• PETG is preferred.
• The print ‘base’ should be printed with 0.2mm or smaller layer height and at 100% infill.
• Shaft assembly, prints: ‘shaft’, 'handle' and ‘shaft_nut’ should be printed with 0.2 or smaller layer height and at 20% or more infill.
• Locking pin assembly, prints: ‘pin’ and ‘pin_nut’ should be printed with 0.1mm layer height and at 100% infill.

Happy printing!