Micron Rear Cover with PUG and PTFE passthrough

Compatible with the excellent Parametric Umbilical Gland (PUG): https://www.printables.com/model/378567-pug-parametric-umbilical-gland

Modeled after a similar rear cover I designed for the Voron Trident, this rear cover is for the Micron R1.  There are two versions of the accent piece, one has the Micron Logo as a separate part and the other has the logo as part of the piece.  

Use the standard Voron settings.  40% infill, 4 perimeters, 5 top/bottom layers.  ABS or ASA.

Assembly is identical to the Micron original and uses the same hardware including a M10 PTFE coupler for the rear.  You will also need to add 2 more heatsets and 2 M3xx BHCS for the PUG holder.

Adapted for Micron.