Transit Tracker Frame

Transit Tracker is an open source DIY public transit arrivals board by Eastside Urbanism. It's like the boards you see at a train station, but miniaturized for home usage. Never be late for your bus, train, ferry, or gondola again!

This is the frame/enclosure which houses the display panels and electronics. It's designed to be printed twice - once for each half.

Instructions

Full build instructions, including slicer recommendations, can be found in the build guide.

Technical Details

While this frame was designed for the Transit Tracker, it's really just an enclosure for two Waveshare RGB-Matrix-P2.5-64x32 panels with an Adafruit Matrix Portal S3, so you could easily repurpose it for any other project which uses this kind of display. Please post a make if you use this frame for your project; I would love to see what you come up with!