Command Strip Shelf

This shelf has three indentations (slots) on the back to put interlocking command strips. The indentations should be just deep enough to hide the two connected command stirps when it is mounted on a wall. I recommend the 10lb interlocking command strips that use what is basically velcro. 

The test shelf I installed seems to be sufficiently strong. Not suitable for heavy objects. I noticed a little bit of separation from the wall when having a full large bottle of dish soap on it for days on end, but my shelf has not fallen as of yet.

Printing is mostly straightforward. Lay it on the top face for the print, and you will have to make sure that you have good bed adhesion. I would recommend using the tree supports for the 90-degree overhang near the “top” of the print. I printed this in the Bambu Carbon X1.