Autodarts Dart camera setup ring light mount (joint plug-in method)

This is my own designed Dart camera setup with a light ring included. I have printed the whole setup on a Bambu Lab A1. I have also included 2 different versions of the joint tolerances (0,04mm and 0,1mm). If the 0,1mm is to lose, you can glue it together. The problem with the other setups is that I hit the camera on top if I wanted to throw a double 20. 

In the middle is a small bridge which height is 0,2mm. You can use it to centre the whole setup and mark the drilling holes. If you dont need it anymore you can break it away. It is also very stable thanks to the bracing on the back. So if you bump into the cameras, nothing will happen. 

The pictures also show the the cable management that i planned. You can use cable ties to hold the cable in place and rotate the ties in the whole.

If anything doesnt fit or you have a problem with something, you can write a comment or text me a private message :)

If you want only the light ring without the cameras check this out. Its the same as this one: 

https://www.printables.com/model/1332822-dart-ring-light-mount

The whole print requires: 

• ca. 1d 17h 25min print time
• 1.520,21g filament (501,61m)
• Printer bed size: 256x256 (lenght, width) tallest object: 190mm
• Cylinder head screws:
  • 12x DIN ISO 4762 M2x8 or M2x10
  • 6x DIN ISO 4762 M4x18 or shorter
• LED Strip 6000K 3 meter width 8mm (https://www.amazon.de/dp/B0DGXDN1ZT?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1)
• Ov9732 Camera (https://www.amazon.de/dp/B0DYJW1S1N?ref=ppx_yo2ov_dt_b_fed_asin_title)