Hitbox-layout fightstick

This is a hitbox-layout fightstick controller that uses 24mm (Sanwa OBSF-24) and 30mm (Sanwa OBSF-30) arcade buttons.

There's a version with 6 and another with 8 action buttons.

There's also a 218mm-wide version that should fit on an Ender 3 printer.

I used an Arduino Pro Micro clone, but it could be used with any other board.

For attaching the bottom plate I used 3x10mm wood screws.

Arduino code: https://github.com/jfedor2/gamepad