Slimbox M: mixbox-layout low profile fightstick

This is a mixbox-layout low profile fightstick. It uses Kailh low-profile (choc v1) mechanical keyboard switches.

Should be printed at 0.20mm layer height. Prints without supports.

I used an Arduino Pro Micro clone, but many other boards should fit.

For attaching the bottom plate I used 3x10mm wood screws.

I used non-3D-printed keycaps for the WASD part. 3D-printed keycaps could also be used, they are a little fragile though.

Arduino code: https://github.com/jfedor2/gamepad