Elementals Statues

Let me introduce you to a set of stylized statuettes representing the four elements. Feel free to scale them up or down as you like. 
There might be a bit of a battle with the supports, but nothing you can’t handle! 😄

If you're interested in the commercial use of my models, or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier that suits you. Thank you!
 

All my photos are REAL and show an actual 3D-printed figure photographed by me.
 

[ Suggested Print Setup ]
Nozzle: 0.4mm
Layer Height: 0.2mm ( You can adjust the layer height based on how much detail you want ) 
Infill: 20%
Wall loops: 5
Supports: Tree (auto)
Printed with: BambuLab PLA Matte Charcoal and painted with metallic paints
 

As always!
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.