Laptop Stand - Tall

A simple stand I designed for a better multi-display setup using a laptop display with a standard monitor. The size should work for 13-14" laptops or larger.

All parts except the bottom cross brace (BraceB) will fit on a Prusa MK2/3/4 sized printer, you can use 2 BraceA parts instead but may have a little less rigidity.

Any material should work fine, I used PETG. 0.2mm layer, 0.4mm nozzle, 3 walls and 15% infil

The heat sets go into the braces, the screws go in from the inside of the frames.

Printed Part Count:

1x Left

1x Right

2x BraceA (4 if you don't use BraceB)

1x BraceB

Hardware needed:

8x M3x8 socket head screws

8x M3x4x5 heat set inserts 

4 pieces of CATTONGUE Grip Tape or rubber feet for the bottom.