Enclosure for diy heart kit from Banggood

I desinged an enclosure for this diy colorfur heart kit (http://www.banggood.com/DIY-Colorful-Heart-Shape-LED-Flashing-Kit-p-973513.html) from Banggood because i wanted to give it as a present to my wife :-)

For more Details what you need to build your own heart look in the BOM.
Short buildlog: http://schwabenpilot.de/2017/03/13/valentinstag-geschenk-aus-dem-3d-drucker/

If there are any questions or suggestions for improvement, please contact me.

Custom Section

BOM

• 1x Diy colorful heart kit (http://www.banggood.com/DIY-Colorful-Heart-Shape-LED-Flashing-Kit-p-973513.html)
• 1x Batterytray for three AAA batteries
• 2x Sheets of Plexiglass with 150x150mm
• 4x M3 Hex Nylon Spacer
• 8x M3 Nuts
• 11x M3 x 6mm Screws