HSW universal powerboard mount

Using the Powerboard Hook from @SteveW91 the Mount from @Billosm & the “Insert-empty” from @RostaP I was able to create a Bowerboard mount that should be reasonably universal for the HSW.

The top parts can slide together, the top one slides to allow for some adjustment.

For my setup i used “HSW Mount with Stopper” at the bottom & “HSW Mount without Stopper” at the top, these are attached to the HSW.

Then i used 2 x “HSW Powerboard Top 1” to hook onto my powerboard.

I have created a couple of variations of the top piece to allow for different powerboard setups etc.

I have just printed this with PLA & supports on bed with a i3MK3S

 

I have combined 3 different files to make what I needed to mount a powerboard to a Honeycomb Wall.