Insignia Flight Stand for Transformers AotP Slingshot & Air Raid

This has been something we've wanted to do with the military insignia from the WFC line, and with the aerial bots now with us - it's time to cook up some cool flight stands for their airborne alt modes!

This set features an articulated arm set upon the logo base, with the top terminating in a ball joint, where the 2 variant corresponding socket pieces will tab into Slingshot and Air Raid's fuselage.

First, for the base logo bit - this can either be printed separately and assembled, or printed using the combined version in a multi-material 3d printer. Either way, here's how the completed insignia base should turn out looking!

For Air Raid, his connector piece has tabs which peg into the twin rectangular notches in his arms.

Slingshot's connector piece tabs into the notches in the middle of his fuselage, which are his upper thighs.

=== Assembly ===

The included diagram shows the assembly for this kit.

Do note that a pair of M3 nuts and bolts will be required to assemble the arm. Admittedly, there may be the need to tighter the nuts and bolts at time to help the stand hold its position.

Also, it is recommended to print the "Socket" parts with higher walls and infill just to give it the necessary strength to hold in place.

===

Enjoy creating these flight stands to display these first two Aerialbots more dynamically. Happy 3d printing! =)