Godox AD300 Pro softbox gel holder

I got me some of these new compact & foldable Godox softboxes AD-S60S, AD-S65W, AD-S85S, etc. for my Godox AD300Pro's. They work just fine but I wanted to use the magnetic color gels from my AK-R1 kit with them. So I decided to design my own gel holder compatible with the AD300 Pro.

I made a couple of prototypes until I came up with this idea. I printed it from black PETG because it needs to be a little bit flexible! You will also need 4x small wood screws (d2.2 x 4.5mm DIN7981). Don't use stainless steel, they need to be magnetic. Some self adhesive foam rubber and aluminium foil tape for the interior of the gel holder

PS. I also uploaded the STEP files in case you have to modify something.

Bill of materials:
Godox AD300 Pro: https://amzn.to/4bGA448
Self adhesive aluminium foil tape (https://amzn.to/3WHegQP)
Self adhesive foam rubber (https://amzn.to/3LIkr1M)
4x ISO 14585 (DIN7981) diameter 2.2mm x length 4.5mm (https://amzn.to/3WDWSxe)
I may earn a commission on qualifying purchases (at no extra cost to you)

More infos on my blog here:
https://www.schweinert.com/diy-gel-holder-godox-ad300pro/

How to install the DIY gel holder inside the softbox:
 

More Godox adapters:

Mini Godox mount to Jinbei softboxes
https://cults3d.com/en/creations/godox-mount-adapter-for-jinbei-softboxes

Mini Godox mount to Aputure Light Dome 2 Mini 2
https://cults3d.com/en/creations/godox-mount-adapter-for-aputure-light-dome-2-mini-2

Copyright:
All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.

If you want to sell my prints commercially and legally, you can join my Patreon:
https://www.patreon.com/technerd863
The digital files (STL and other formats) may never be resold, shared, remixed or given away.