Case Front H1+ Bendable Antenna
stl Case Front H1+ Bendable Antenna
stl Front case for antenna up to 15 mm in diameter at the base and omni-directional bending.
2 MB | June 14, 2025
Case Rear H1+ Bendable Antenna
stl Case Rear H1+ Bendable Antenna
stl Rear case for antenna up to 15mm in diameter at the base and omni-directional bending.
497 kB | June 14, 2025
Buttons V1.2
stl Buttons V1.2
stl No changes from the original muzi.work's H1 case design.
208 kB | June 13, 2025
Case Front H1+
stl Case Front H1+
stl Front case for antenna up to 15mm in diameter at the base and limited/no bending.
2 MB | June 14, 2025
Case Rear H1+
stl Case Rear H1+
stl Rear case for antenna thicker than 10mm in diameter at the base and limited/no bending.
497 kB | June 14, 2025
Case Front H1+ Standard Antenna
stl Case Front H1+ Standard Antenna
stl Front case for antenna up to 10mm in diameter at the base.
3 MB | June 14, 2025
Case Rear H1+ Standard Antenna
stl Case Rear H1+ Standard Antenna
stl Rear case for antenna up to 10mm in diameter at the base.
598 kB | June 14, 2025
V4 Case Front H1+ Bendable Antenna
stl V4 Case Front H1+ Bendable Antenna
stl Heltec V4-compatible front case for antenna up to 15 mm in diameter at the base and omni-direct
2 MB | October 30, 2025
V4 Case Rear H1+ Bendable Antenna
stl V4 Case Rear H1+ Bendable Antenna
stl Heltec V4-compatible rear case for antenna up to 15mm in diameter at the base and omni-directio
542 kB | October 30, 2025
V4 Case Front H1+
stl V4 Case Front H1+
stl Heltec V4-compatible front case for antenna up to 15mm in diameter at the base and limited/no b
2 MB | October 30, 2025
V4 Case Rear H1+
stl V4 Case Rear H1+
stl Heltec V4-compatible rear case for antenna thicker than 10mm in diameter at the base and limite
544 kB | October 30, 2025
V4 Case Front H1+ Standard Antenna
stl V4 Case Front H1+ Standard Antenna
stl Heltec V4-compatible front case for antenna up to 10mm in diameter at the base.
3 MB | October 30, 2025
V4 Case Rear H1+ Standard Antenna
stl V4 Case Rear H1+ Standard Antenna
stl Heltec V4-compatible rear case for antenna up to 10mm in diameter at the base.
629 kB | October 30, 2025
The author remixed this model.
Differences of the remix compared to the original
- Increased overall case size to accommodate higher capacity (and thus larger) batteries up to 10mm x 35mm x 65mm (MakerFocus 3,7V 3000mAh) for increased battery life
- Support for larger and more powerful antennas up to 15mm in diameter at the base, as well as full omni-directional bend for bendable antenna (e.g. DIYmall 5DBi LoRa Antenna)
- Additional space able to fit a small GPS module (e.g. HGLRC M100 Mini GPS)
- H1+ inscribed text on the case's front panel as an extra detail for a further unique look
- Heltec V4-compatible version of all variants of the H1+ case
