Prusa Enclosure MK4 Nozzle & Hotend Holder

I really love the holder by @ManuelBeeler_305636 but I don't have 6 hotends and quite a few nozzles 😅.

I combined for my needs both versions into a 3/3 ratio.
I also need it for the left side, so this remix has a left and right version.

Each side has a version for 3m screw (the ones from the enclosure) and 3m threaded insert support

Addons

• Exchangeable Labels: https://www.printables.com/model/1327391-exchangeable-labels-for-prusa-enclosure-mk4-nozzle 
• Adapter to convert a Hotend Slot into a Nozzle one: https://www.printables.com/model/1327111

Print Instructions

• Same as original
• Print non mmu for testing and if it works for you, print the MMU version
• See 3mf about settings and orientation
  • note, (Experimental) Sparse Layers option is enabled
• If you want to speed up the print, don't print in MMU 😂😅
  • you can try 0.2 layer height to cut 5h
    • if you choose speed, you can cut another 2h
      • both untested, feedback welcome 😄

(Note: the preview print unfortunately didn't 100% succeed, my print tower said good by 3h before the end and I also had a glitch caused by OctoPrint, so your print will look even better for sure)

Combined both versions & added support for dynamic labels. Also created an adapter which converts a hotend slot into a nozzle slot. Left side version available as well.