SV08 - LED Daylight On A Stick - with Diffusor!

Please don't forget to give me a Like. :)

Replace the tiny LED strip on your SV08 with an LED Daylight Stick (version for Voron 2.4 XXL stick 370mm like this one from aliexpress).

The main model is for the right side of the top frame from the SV08. It uses the screw holes from the bowden holder. Additionally they are extra mounting holes but for using them you need to drill holes into your top profile.

There are different versions:

• with Bowden holder for the stock filament holder
• without the holder but using the screw holes
• with Bowden holder for the stock filament holder and clips for the filament sensor cable
• Basic version - for the left side as well

No cable works for the right side version needed. You can use the LED stock cable. Depending on the Daystick version you have to adopt the plug.

Print the daylight-stick-holder in ABS or ASA. I printed the diffusor with PC transparent (natural) but PETG transparent might work as well. No supports needed if your printer and filament is calibrated. Just reduce printing speed for the little overhangs.

The CAD model is available at onshape.

Modification the Sovol SV08