CYD (Cheap Yellow Display) Modular Case
Description
PDFSummary
This is a modular rework / remix of the original case design by ncmreynolds, licensed under the Creative Commons - Attribution - Share Alike license. Full credit to them for the original idea and base structure.
What’s New?
The goal of this remix was to simplify and modularize the case:
Simplified Top and Bottom Layers
The top and bottom sections are now smaller and less complex, making them easier and faster to print.
Better Fit for CYD Boards
The original groove was too tight for some CYD boards. This version adjusts that for a more reliable fit.
Modular Extensions
You can now stack layers to suit your project. Add or remove sections as needed!
Included Files
CYDEnclosureRear.stl
Updated with an additional hole to allow easy access to the pen reset and reboot buttons.
CYDEnclosureFront.stl
A slimmer, simplified front case with reduced wall height and openings for both MicroUSB and USB-C ports.
CYDProtoLayer.stl
A 1.5mm thick layer featuring a grid of 3mm holes – perfect for mounting add-on boards like GPS, NRF24, etc.
CYDProtoLayerSpeakerHole.stl
A 1mm thick layer featuring a grid of 3mm holes, with an opening for the speaker connector, to be mounted close to the frontbox – perfect for mounting add-on boards like GPS, NRF24, etc.
CYDEnclosureExtender15mm.stl
A 15mm intermediate layer with two SMA connector holes .
CYDEnclosureExtender10mm.stl
A clean 10mm layer with no holes – great for adding height or modifying to suit your own needs. This layer scales well and is ready for customization.
CYDEnclosureExtender06mm.stl
A clean 06mm layer with no holes – great for adding height or modifying to suit your own needs. This layer scales well and is ready for customization.
CYD_PenHolder06mm.stl
A 06mm clean layer with a pen holder for the original pen that comes with the CYD.
******All exterior holes are designed for M3 screws.**** Size depends on your stack!
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Summary
This is a modular rework / remix of the original case design by ncmreynolds, licensed under the Creative Commons - Attribution - Share Alike license. Full credit to them for the original idea and base structure.
What’s New?
The goal of this remix was to simplify and modularize the case:
Simplified Top and Bottom Layers
The top and bottom sections are now smaller and less complex, making them easier and faster to print.
Better Fit for CYD Boards
The original groove was too tight for some CYD boards. This version adjusts that for a more reliable fit.
Modular Extensions
You can now stack layers to suit your project. Add or remove sections as needed!