Filament_rack_250kg
I just resized this in orca slicer to allow it to use 1/2" dowels instead
6
12
0
112
updated
June 8, 2025
Description
PDFI reduced the size down to 60% in orca slicer on my Flash forge AD5M.
I have included the 3mf file that should have all the settings needed. I used the same settings for the original just reducer the size.
Dowels needed: ½"
8 - 8" long
6- 12" long
They fit very snug so it will require a rubber mallet or hammer to assemble.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
I reduced the size down to 60% in orca slicer on my Flashforge AD5M.
I have included the 3mf file that should have all the settings needed. I used the same settings for the original.
Dowels needed: ½"
8 - 8" long
6- 12" long
They fit very snug so it will require a rubber mallet or hammer to assemble.
