Wrenches rack - Gridfinity

I made a 5x5 gridfinity based rack to hold mix-branded open end, combination or box end wrench sets. The slots should be wide enough and spaced far enough for most any wrench set without padding on them. Would probably work for most unpadded ratcheting wrenches as well, but my toolbox isn't that fancy yet. 

The bigger wrenches hang over the 5x5 grid base, but if you have two sets (separate metric and standard or imperial sets) then you can arrange them side by side like shown with a slight offset from centered and they might stay in the 10x5 space. 

Basic dimensions:

Slot width: .27"

Height from platform to bottom of slots: .75"

Gridfinity grid size: 5x5

.stp file for easy modifying and remixing!