KLS 30 Fold Bicycle Lock Bracket

A bracket for the KLS 30 Fold bicycle lock. It prints in four parts. The clip to keep the lock in position is optional. 

Needs four M3x6 screws plus four M3 nuts. If you print the optional clip to hold the lock in position, in addition four M2x5 self tapping screws and one 33x2mm bolt are needed. 

If you print without the optional clip, just print parts “frame” and “mount”.

Besides the .stl file, I uploaded also the .3mf file, which adds supports and reinforced areas with 100% infill. Ready for printing. Printed in 0.20mm Quality and Prusament PLA on my MKS3+.