Ikea PLASTA Gridfinity shelf

A 2x13 Gridfinity shelf, designed to perfectly fit the right side of an Ikea PLASTA.
Requires some assembly materials.
 

The shelf is designed so it can be printed on a standard printer with a bed size of 225x225. I printed mine in PLA. so far it holds up extremely well and doesn't bend at all.
It should not require any support, although there are some small overhangs on the underside, which is why I recommend turning supports off before printing.

For securing the shelf to the PLASTA frame, you require:
6x M4x25 Screws
6x M4 Nuts
6x M4 Washers. I added some extra PLA ones, which can be found with the model files.

For connecting the shelves together, you need:
6x M3x14 Screws
6x M3 Nuts  

For mounting the shelf, I first drilled through the PLASTA frame from the inside, taking care of the height and the distance between the top and bottom holes; there should be an empty one in between. Then you should, while not fully tightening them, screw the three separate shelf parts, using the M4 hardware, to the PLASTA frame (the nuts go in the printed part). Afterwards, screw the three parts together with the M3 hardware, taking care to put the nuts on the right side (on the bottom of the shelf, there also are two places for bolts and nuts). Ending with tightening the M4 screws.