Deburrer Holder for HSW (Wera Handle)

I really liked the Wera Handle for a hex shaped Deburring tool, but couldn't find a holder or hook for the HSW to hold it. 

I modified the deburring hook to accommodate this much wider handle. It holds the deburring tool and handle very comfortably and is very sturdy. 

It will need an M3 insert for the HSW, as well as an M3x6, M3x8, or M3x10 screw.

I printed it with 0.6 mm diameter nozzle, 0.25mm layer thickness, and 0.65 mm walls. Any values less than these will also be fine.

It's printed with 4 walls, and 30% infill in PETG. The infill should be good with any amount, and 3 walls would work as well. 

I used the mount section for the HSW but redesigned the hook to hold the Wera Handle for General Tools Deburring Tools

https://www.thingiverse.com/thing:6169476