Bilora Multi 75-95 tripod replacement foot

This is a replacement foot for the Bilora Multi tripod I inherited from Dad. The tripod must be from the 1980s but still in mint condition, except for the feet. The 2K feet disintegrated into pieces due to the softeners deteriorating.

Since I do not use it too much and keep it mostly due to memories, I quickly designed this foot in Fusion360 and printed it in PLA. Settings in PrusaSlicer are "0.2mm speed" (2 walls, 15% infill). 

However, if you seriously want to use it, print it in multi material (outer body in TPU, thread in PETG or something better) and use “beam interlocking”. This requires either a multi-tool printer or a MMU / AMS. You also need to be daring to use TPU in it (it works in my MMU3 with “Flex Hard” from Extrudr). If someone is seriously interested, I can also alter the design to be printed in two pieces and these being glued together. Send me a message through Printables in this case.

Enjoy and do not forget to rate and leave a make :-)