Spool Divider | 8cm & 10cm | Prusament | Geeetech

Spool Divider for 10cm and 8cm core diameter spools.

Use double sided tape to glue the dividers to the spool core to avaoid the dividers falling off when the spool becomes empty.

Tested with Prusament paper core and Geetech spools.

One divider leaps 89° around the spool to enable smooth installation.
An accumulated gap of 4° or a 1° gap between each divider is to be expected.

To achive the pictured honeycomb filling, set 0 solid bottom and top layers and at least 4 perimeters at 0.4mm width.