K1C BTT Eddy Mount

Created this because I wasn't satisfied with the options for Eddy mounts for the K1C

Only tested on K1C. Unsure about K1 or K1 Max.

Not completely finished. Unhappy with how the overhang prints. But it printed well enough for me to use.

Print 2 washers to insulate the screws from the board.

BOM:

4 - M3x8 BHCS

2 - M3 Nuts

Highly recommend SimpleAF Firmware for the K1

SimpleAF - SimpleAF Docs

use the default mount

X: -23

Y: 0