Cap for bstolk's Deburring Tool Handle

This cap perfectly fits bstolk's Deburring Tool Handle while using less than five grams of material. It fully encompasses an affixed blade while being able to slide on and off with ease.

Print orientation should be as modeled, with the large flat surface in contact with the build plate. No supports are required.
Tested with a MC-10 blade affixed. I printed it in PETG on a 0.4mm nozzle with a 0.1mm layer height to minimize layer lines and it turned out flawless.

I modeled this cap to perfectly fit bstolk's Deburring Tool Handle with a blade affixed. I used bstolk's mesh as a reference only and all work uploaded is my original design.