Adjustable Lego Ship Wall Mount

If you have any Feedback on the model let me know - I want to make better! 

Printing: I printed mine in PETG, but PLA should work as well with standard settings. The 3mf file has the parts oriented in the direction that I printed them in. 

Hardware List: 

• 3 - M4 x 10 mm Heat Set Threaded Inserts 
• 1 - M4 x 25 mm Socket Head Cap Screw
• 2 - M4 x 12 mm Pan Head 
• 4 or more - Lego 1x1 Round Plates 
• 2 - wood screws or wall anchors. 

Assembly: 

1. Place 3 of the heat set inserts into the “Arm” - see the pictures. 
2. Place the Lego 1x1 round plates into the ship mount. They should press fit into the model, they are tight by design so that you don't have to use glue. 
3. Assemble with the screws above as shown in the pictures. 
4. Screw the wall mount to the wall using appropriately size drywall anchors or wood screws into a stud.