Sliding latch for gate or doors

door latch I made for chicken coop
49
85
0
295
updated June 3, 2025

Description

PDF

Very simple and easy to print and assemble sliding latch. To install you will need eight 4mm wood screws and a little bit of grease to put on the slider for smoother operation. Also with the model are included 1mm spacer for the back of the latch.

 

Hardware needed:

8x 4mm wood screws (I used 4x25mm)

 

To print the latch I would reccomend either PETG, ABS or ASA for outdoor use.

Tags



Model origin

The author marked this model as their own original creation.

License