This is a custom mount designed specifically for the Mac Mini M4. It slides directly onto a 35mm diameter pole (commonly used in monitor arms like NB), with no universal adapter — just a friction fit.
🔧 Print the included test ring first to make sure it fits your pole correctly.
If the test ring slides onto the pole without force but doesn’t wobble significantly, then the full mount will likely fit just right as well.
📏 The model includes 0.3 mm clearance to account for typical FDM tolerances. Fit may vary depending on your printer, filament, and slicer settings.
Material: PLA / PETG
Infill: 10% is sufficient
Supports: Only if needed (depends on orientation)
Layer height: 0.2 mm
If you remix or modify this model, please credit the original author.
👍 If you find this useful, leave a like or share a photo of your print — it helps a lot!
The author marked this model as their own original creation.