Bike Kickstand Rear-mount

Bike Kickstand (Fahrradständer), designed for my sons Bulls bike.

Based on Bike Kickstand V2, modified for rear mount.

Easy to print and assemble, just 4parts:

1. Outer joint (print flat side down without support and >50% infill)

2. Leg (with support, >60% infill)

3. Bolt (no support)

4. Foot (no support, >30% Infill)

Assembly:

Attach the leg to the outer joint and push the bolt through the hole (e.g. using a hammer).

Put some screws into the small holes in the joints and attach a spring (optional if printed tight).

Push the foot into the leg.

Fits for a 26" Bulls bike, but could be scaled up to larger bikes too.

Printed using GCodePrintr App. http://3dprintapps.de

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.25

Infill: